We offer a wide variety of high pressure hydraulic jacks designed to withstand rugged environments. When the job calls for heavy-duty lifting and positioning, you need simple dependable tools. We provide industrial-grade cylinders, pumps, jacks and more for those who just need to get the job done.
Teamwork cns Inc. offers the widest selection of cylinder styles, tonnages and strokes to match your specific requests. Stop rings, plated pistons and heavy duty construction provide trouble free operation and long life. Cylinders are designed for 10,000 psi operating pressure which offers a smaller footprint and greater force. Incorporate a positive piston stop to limit piston travel at the end of the stroke, and allows the cylinder to be operated at full stroke. Polyurethane wipers clean the rod surface during retraction, protecting the inner cylinder assembly from dirt, moisture and other contaminants. Single acting cylinders are hydraulically driven in one direction. These cylinders are used in many general purpose applications when retract speed is not a requirement. This cylinder type requires a pump source with a single acting valve for proper operation. Double acting cylinders are hydraulically driven in both directions. These cylinders are used in many general purpose applications where retraction speed is required or the mechanical forces required for return is not available. This cylinder type requires a pump source with a 4 way valve for proper operation.
Multi-positional for any high force requirements. Solid plunger with hardened saddle. Collar threads, mounting base and piston for safe handling. Capacity Range- 5 to 100 ton
1.Max Working Pressure: 700bar;2.Single acting cylinders with heavy duty return springs and are designed to be used in all orientations;3.Base mounting holes along with ram and collar threads enable various installation options;4.Durability is enhanced by using high strength alloy steel;5.Corrosive resistant baked enamel can be upgraded to nickel plating on most models;6.The stop ring avoids the piston rod over-reaching and enables maximum cylinder extension.