Hemm Tools

Product Details:

Heavy Duty Hydraulic Floor jack, Capacity 5 and 10 Ton.

• Professionally designed with thick welded steel plate construction and an oversized saddle.
• Specially designed several sizes wide,low profile,
• durable roller wheel for quick and accurate placement where you need it.
• each floor jack paired with one handle for easy operate

• Heavy gauge steel side plates prevent twisting - front wheels with roller bearings and ball bearing mounted rear caster wheels provide - stability and easy maneuverability - rear kick plate helps turn jack in tight places - hydraulic power unit is uni weld constructed for increased strength and leak prevention - wiper seals protect hydraulic system from contaminants - flash chromed ram and pump piston for rust prevention - overload and bypass safety valves prevent the jack from being used beyond its rated capacity and ram over extension - foot pump pedal raises the lift arm to the load quickly and "t" handle pumps jack under load - release knob on top of handle operates independently of handle locking lever.

• Minimum Height- 145 mm 

• Length- 1400 mm and 2600 mm.

• Maximum height- 620 mm

Product Details:

Hydraulic Bead Breaker delivers up to 10,000 PSI of force and a 13.8-ton ram to break the toughest beads in seconds. To be used in conjunction with a 10,000 PSI hydraulic pump (manual or air) to quickly break beads. For use on 25 inch to 51 inch off the road 5-piece wheels. Has pry bar/bead loosening pockets.

• Use on 5-piece rims 25” to 51” with pry bar/beadloosening pockets.• 4-1/4” stroke, 13.8 ton ram will break the toughestbeads.• Same as IMT-1800.• 10207 kit contains 10100 bead breaker, 10500 pumpand 10604 hose assembly.• 10209 kit contains 10100 bead breaker, 10592 pumpand 10604 hose assembly.• Use with any 10,000 p.s.i pump.

Product Details:

Hydraulic Track pin Pusher, Complete equipment for removal and installation of Track pins, master pins, bushings and master bushings. Ram Capacity-50/100/200 ton,   operating pressure- 700 bar, stroke- 200 mm.

Available with hand pump and Motorised Pump.

 

Consists of :

???Hydraulic Double acting Cylinder, Capacity- 50/100/200 ton, Operating Pressure- 700 bar, Stroke: 200 mm, Steel body

??? C-Frame: To hold the track links attached to the Cylinder

??? Carrying Case

??? Safe Guard

??? Pushing Pin (to suit BE 1000 and BE 1600 EXCAVATOR), Aligning Bush, Aligning Adaptor,




??? 

Hydraulic power pack unit 2 hp (Compact) x 20 liters oil tank capacity (without oil), flow 1 l/min, max. working pressure 700 bar, consisting of radial piston pump with bell housing, hydraulic elements – hand lever operated directional control valve, pressure relief valve, pressure gauge, all mounted on top of the oil tank.

Tank accessories – filler breather, suction strainer, oil level indicator etc.