Having correctly aligned machines reduces the risk of breakdowns. Typical problems arising from poor machine alignment are:
• LOST PRODUCTION
• LEAKING SEALS
• INCREASED VIBRATION
• HIGHER ENERGY CONSUMPTION
• BEARING FAILURE
• SHAFT BREAKAGE
• COUPLING WEAR• QUALITY PROBLEMS
There is much to be gained in terms of time and money by adjusting the machines within the prescribed tolerances. Investing in a laser-based measuring system will benefit the company by reducing the cost of spare parts and lost
production. And the working environment is improved at the same time.
|Minimum Order Quantity||1 Set|
Portable, quick, and accurate, laser shaft alignment systems have become the tool of choice for many industrial applications. There are a variety of laser alignment systems available from several vendors, yet the basic components and alignment methodology are the same.
Laser shaft alignment systems typically consist of two sensors (laser emitters/receivers), rods, brackets, chains, and a display unit. Most systems today have Bluetooth Wireless built-in or some even have the ability to connect directly through a downloadable app on a tablet or smartphone.
Laser shaft alignment systems can be modified with extended chains for larger diameter shafts, and longer rods for aligning shafts with larger couplings or to avoid obstructed laser paths.
Before the sensors are mounted, a pre-alignment check should be completed. Pre-alignment includes performing a rough alignment, eliminating obvious soft foot, tightening bolts and doing a final soft check.
Once the pre-alignment check is complete, the sensors are mounted to both the stationary and movable shafts or coupling hubs, and the lasers beams are turned on. The operator will then be prompted to run through a predetermined series of steps which include entering specified dimensions and selecting the necessary tolerances based on either the preset choices or customizing to the customer’s tolerance specifications.
The operator will next take alignment readings using a 180° minimum sweep (suggested for best results). These systems measure at a high rate of speed and detect alignment variations in microns, with results displayed immediately to the nearest .0001”. Once initial data is gathered, the unit will then prompt the operator through the steps needed to correct both horizontal and vertical misalignment
|Minimum Order Quantity||1 Piece|